Back to Blog
How-to Guides 2026-11-20 Purpose-Built EDC Gear, Adventure Apparel & Expedition-Grade Tools 0 views

How to Use a Steel Flame Copper Dog Tag for EDC

How to Use a Steel Flame Copper Dog Tag for EDC

Learn how to incorporate a Steel Flame Copper Dog Tag with Prometheus Platoon engraving into your everyday carry. Covers jump ring setup, identification use, and care tips.

What Makes This Dog Tag Different for EDC

The Steel Flame Copper Dog Tag with Prometheus Platoon engraving is a handcrafted EDC item from Derrick Obatake of Steel Flame in Southern California. It’s not a standard military tag — it’s a collectible piece that represents unit cohesion and teamwork. The copper construction gives it a warm, natural patina over time, and the included sterling silver jump ring lets you attach it to keys, zipper pulls, or a neck chain immediately.

Tag Specifications That Affect Carry

Setting Up the Jump Ring for Everyday Carry

The tag arrives with a sterling silver jump ring already attached, but you may want to adjust or replace it to suit your carry method. Follow these steps to ensure a secure setup.

  1. Check the existing ring: Inspect the jump ring for any gaps. If it came pre-closed, it may still have a slight opening. Use two pairs of small pliers (or your fingers if the ring is soft sterling) to gently twist the ends apart and back together for a tight closure.
  2. Thread the ring through the tag’s hole and then through your keyring, zipper pull, or a small split ring. Close the jump ring by pressing the ends together until they meet flush.:
  3. Give the tag a gentle tug to confirm the ring is fully closed. If it opens easily, the ring may need to be squeezed more firmly or replaced with a thicker split ring for heavy-duty carry.:

Using the Tag for Field Identification

While this dog tag is not a standard military-issue ID, it works well as a personal identifier on gear bags, tool rolls, or as a zipper pull on a backpack. The stamped Prometheus Platoon logo is easily recognizable to those in the EDC community, and the copper surface can be lightly engraved with a Dremel or permanent marker if you want to add your own contact info or a unit designation. Because it’s metal, it won’t fade or peel like a paper label.

Caring for the Copper Finish

Copper naturally darkens and develops a greenish-brown patina over time. If you prefer the original bright copper look, you can polish it with a soft cloth and a mild copper cleaner. For a more rugged, aged appearance that matches field gear, simply let it oxidize naturally. Avoid exposing the tag to harsh chemicals or prolonged moisture, as the jump ring is sterling silver and may tarnish, though it can be cleaned with a silver polishing cloth. The supplied information does not include specific cleaning instructions, so treat it like any fine metal EDC item.

Related Articles

Customer Service
Home
Products
Cart
Profile