Back to Blog
How-to Guides 2026-11-21 Purpose-Built EDC Gear, Adventure Apparel & Expedition-Grade Tools 0 views

SPD X MKII Paradive Dive Watch Setup Guide

SPD X MKII Paradive Dive Watch Setup Guide

Learn how to set up your SPD X MKII Paradive LTD Edition watch: bezel, crown, spring bars, straps, and compass kit for field and dive use.

What You Get in the Full Set

The SPD X MKII Paradive LTD Edition Full Set is a collaboration with MKII Watches, limited to 5 numbered sets. Besides the watch itself, the set includes two PDW Ti-NATO straps, an Expedition Watch Band Compass Kit, and a custom Loveless-style Chute Knife by Wesley Liversage. This guide covers the watch-specific setup steps so you can adjust the bezel, crown, spring bars, and straps for your wrist and intended use.

Key Specifications That Affect Setup

  • SPD X MKII Paradive LTD Edition Full Set: Case diameter 42 mm, thickness 15.54 mm, lug width 20 mm, end-to-end length 49.5 mm. These dimensions determine strap compatibility and wrist fit. The 20 mm lug width matches the included Ti-NATO straps and most standard 20 mm watch bands.
    SPD X MKII Paradive LTD Edition Full Set
    SPD X MKII Paradive LTD Edition Full Set
  • SPD X MKII Paradive LTD Edition Full Set: Reinforced heavy-duty 2.50 mm spring bars meet ISO dive watch standards; a thinner set of 1.80 mm spring bars is also supplied for standard straps. Use the 2.50 mm bars for the included Ti-NATO straps or any strap you intend to wear in water or hard use. Switch to 1.80 mm bars for lighter, non-dive straps to reduce bulk at the lugs.
  • SPD X MKII Paradive LTD Edition Full Set: Unidirectional 120-click bezel with aluminum timing dials, a safety feature for underwater timing. The bezel rotates only counterclockwise to prevent accidental over-correction during dive timing. Familiarize yourself with the click feel before relying on it underwater.
  • SPD X MKII Paradive LTD Edition Full Set: Double-gasket screw-down crown with a solid one-piece stem. The screw-down crown ensures water resistance to 200 meters. Always check it is fully tightened before submersion. The one-piece stem improves reliability compared to earlier two-piece designs.

Step-by-Step Setup

  1. Choose and Install Spring Bars: Decide which spring bar thickness suits your use. For dive or field use, install the reinforced 2.50 mm bars using a spring bar tool. For a lighter everyday strap, use the supplied 1.80 mm bars. Insert the bar into the lug holes and ensure it snaps into place securely.
  2. Attach the Ti-NATO Strap: Thread one of the PDW Ti-NATO straps through the spring bars. NATO-style straps pass under the watch case and through both sets of spring bars for added security. Adjust the strap length so the watch sits comfortably on your wrist without pinching.
  3. Set the Bezel for Dive Timing: Rotate the unidirectional bezel counterclockwise until the zero marker aligns with the minute hand. During a dive, the elapsed time is read against the bezel markings. Test the 120-click rotation to confirm smooth, positive detents.
  4. Operate the Crown: Unscrew the crown counterclockwise to release it. Pull to position 1 for winding (automatic with manual winding capability), position 2 for quickset date adjustment, and position 3 for hack setting the time. Push the crown back in and screw it down clockwise until snug—do not overtighten.
  5. Attach the Expedition Watch Band Compass Kit: The compass kit mounts onto the strap or band. Follow the kit’s included instructions for placement—typically on the strap between the watch case and the buckle. Ensure the compass is securely fastened and does not interfere with the watch crown or bezel.

Checkpoints Before First Use

Before taking the Paradive into the water or field, confirm the following: the crown is fully screwed down, the spring bars are properly seated, and the bezel rotates freely only counterclockwise. The watch is verified to ISO 6425 for dive watches to 200 meters, so the seals and construction are rated for submersion—but always double-check the crown and crystal for damage before a dive.

The synthetic sapphire crystal with inner anti-reflective coating is press-fit and does not develop crazing like earlier designs. If you plan to swap straps frequently, keep the 1.80 mm bars handy to reduce wear on the lug holes. The included Chute Knife and compass kit are separate tools; their maintenance follows their own care guidelines.

Related Articles

Customer Service
Home
Products
Cart
Profile